AppsFlyer

tap-appsflyer (airbyte variant)🥉

SaaS mobile marketing analytics and attribution platform

The tap-appsflyer extractor pulls data from AppsFlyer that can then be sent to a destination using a loader.

Airbyte Usage Notice

This connector uses tap-airbyte-wrapper to call the underlying Airbyte source Docker container. This means you must have Docker installed and running prior to usage. We also recommend using Meltano version 2.13.0 or later.

Container-based connectors can introduce deployment challenges including the potential need to run Docker-in-Docker (not currently supported by services like AWS ECS, Meltano Cloud, etc. see FAQ and Airbyte's ECS deployment docs for more details). Before using this variant we recommend considering if/how you will be able to deploy container-based connectors to production.

For more context on how this Airbyte integration works please checkout out the FAQ in the Meltano Docs.

Alternate Implementations

Getting Started

Prerequisites

If you haven't already, follow the initial steps of the Getting Started guide:

  1. Install Meltano
  2. Create your Meltano project

Installation and configuration

  1. Add the tap-appsflyer extractor to your project using 
    meltano add
     : 
    2. meltano add extractor tap-appsflyer --variant airbyte
  2. Configure the tap-appsflyer settings using 
    meltano config
     : 
    3. meltano config tap-appsflyer set --interactive
  3. Test that extractor settings are valid using 
    meltano config
     : 
    4. meltano config tap-appsflyer test

Next steps

If you run into any issues, learn how to get help.

Capabilities

The current capabilities for tap-appsflyer may have been automatically set when originally added to the Hub. Please review the capabilities when using this extractor. If you find they are out of date, please consider updating them by making a pull request to the YAML file that defines the capabilities for this extractor.

This plugin has the following capabilities:

  • about
  • catalog
  • discover
  • schema-flattening
  • state
  • stream-maps

You can override these capabilities or specify additional ones in your meltano.yml by adding the capabilities key.

Settings

The tap-appsflyer settings that are known to Meltano are documented below. To quickly find the setting you're looking for, click on any setting name from the list:

You can also list these settings using 

meltano config
with the list subcommand: 

meltano config tap-appsflyer list

You can override these settings or specify additional ones in your meltano.yml by adding the settings key.

Please consider adding any settings you have defined locally to this definition on MeltanoHub by making a pull request to the YAML file that defines the settings for this plugin.

Airbyte Config Api Token (airbyte_config.api_token)

  • Environment variable: TAP_APPSFLYER_AIRBYTE_CONFIG_API_TOKEN

Pull API token for authentication. If you change the account admin, the token changes, and you must update scripts with the new token. Get the API token in the Dashboard.


Configure this setting directly using the following Meltano command:

meltano config tap-appsflyer set airbyte_config api_token [value]

Airbyte Config App Id (airbyte_config.app_id)

  • Environment variable: TAP_APPSFLYER_AIRBYTE_CONFIG_APP_ID

App identifier as found in AppsFlyer.


Configure this setting directly using the following Meltano command:

meltano config tap-appsflyer set airbyte_config app_id [value]

Airbyte Config Start Date (airbyte_config.start_date)

  • Environment variable: TAP_APPSFLYER_AIRBYTE_CONFIG_START_DATE

The default value to use if no bookmark exists for an endpoint. Raw Reports historical lookback is limited to 90 days.


Configure this setting directly using the following Meltano command:

meltano config tap-appsflyer set airbyte_config start_date [value]

Airbyte Config Timezone (airbyte_config.timezone)

  • Environment variable: TAP_APPSFLYER_AIRBYTE_CONFIG_TIMEZONE

Time zone in which date times are stored. The project timezone may be found in the App settings in the AppsFlyer console.


Configure this setting directly using the following Meltano command:

meltano config tap-appsflyer set airbyte_config timezone [value]

Airbyte Spec Image (airbyte_spec.image)

  • Environment variable: TAP_APPSFLYER_AIRBYTE_SPEC_IMAGE
  • Default Value: airbyte/source-appsflyer

Airbyte image to run


Configure this setting directly using the following Meltano command:

meltano config tap-appsflyer set airbyte_spec image [value]

Airbyte Spec Tag (airbyte_spec.tag)

  • Environment variable: TAP_APPSFLYER_AIRBYTE_SPEC_TAG
  • Default Value: latest

Airbyte image tag


Configure this setting directly using the following Meltano command:

meltano config tap-appsflyer set airbyte_spec tag [value]

Docker Mounts (docker_mounts)

  • Environment variable: TAP_APPSFLYER_DOCKER_MOUNTS

Docker mounts to make available to the Airbyte container. Expects a list of maps containing source, target, and type as is documented in the docker --mount documentation


Configure this setting directly using the following Meltano command:

meltano config tap-appsflyer set docker_mounts [value]
Expand To Show SDK Settings

Flattening Enabled (flattening_enabled)

  • Environment variable: TAP_APPSFLYER_FLATTENING_ENABLED

'True' to enable schema flattening and automatically expand nested properties.


Configure this setting directly using the following Meltano command:

meltano config tap-appsflyer set flattening_enabled [value]

Flattening Max Depth (flattening_max_depth)

  • Environment variable: TAP_APPSFLYER_FLATTENING_MAX_DEPTH

The max depth to flatten schemas.


Configure this setting directly using the following Meltano command:

meltano config tap-appsflyer set flattening_max_depth [value]

Stream Map Config (stream_map_config)

  • Environment variable: TAP_APPSFLYER_STREAM_MAP_CONFIG

User-defined config values to be used within map expressions.


Configure this setting directly using the following Meltano command:

meltano config tap-appsflyer set stream_map_config [value]

Stream Maps (stream_maps)

  • Environment variable: TAP_APPSFLYER_STREAM_MAPS

Config object for stream maps capability. For more information check out Stream Maps.


Configure this setting directly using the following Meltano command:

meltano config tap-appsflyer set stream_maps [value]

Something missing?

This page is generated from a YAML file that you can contribute changes to.

Edit it on GitHub!

Looking for help?

If you're having trouble getting the tap-appsflyer extractor to work, read the Airbyte connector FAQ, look for an existing issue in the Airbyte repository, file a new issue, or join the Meltano Slack community and ask for help in the 
#plugins-general
channel.

Install

meltano add extractor tap-appsflyer --variant airbyte

Maintenance Status

  • Maintenance Status
  • Built with the Meltano SDK
  • Based on an Airbyte Connector

Repo

https://github.com/airbytehq/airbyte/tree/master/airbyte-integrations/connectors/source-appsflyer
  • Last Commit Date
  • License

Maintainer

  • Airbyte

Meltano Stats

  • Projects (Last 3 Months)

Keywords

  • airbyte_protocolmeltano_sdk