MongoDB

tap-mongodb (airbyte variant)🥈

General purpose

The tap-mongodb extractor pulls data from MongoDB that can then be sent to a destination using a loader.

Airbyte Usage Notice

This connector uses tap-airbyte-wrapper to call the underlying Airbyte source Docker container. This means you must have Docker installed and running prior to usage. We also recommend using Meltano version 2.13.0 or later.

Container-based connectors can introduce deployment challenges including the potential need to run Docker-in-Docker (not currently supported by services like AWS ECS, Meltano Cloud, etc. see FAQ and Airbyte's ECS deployment docs for more details). Before using this variant we recommend considering if/how you will be able to deploy container-based connectors to production.

For more context on how this Airbyte integration works please checkout out the FAQ in the Meltano Docs.

Alternate Implementations

Getting Started

Prerequisites

If you haven't already, follow the initial steps of the Getting Started guide:

  1. Install Meltano
  2. Create your Meltano project

Installation and configuration

  1. Add the tap-mongodb extractor to your project using 
    meltano add
     : 
    2. meltano add extractor tap-mongodb --variant airbyte
  2. Configure the tap-mongodb settings using 
    meltano config
     : 
    3. meltano config tap-mongodb set --interactive
  3. Test that extractor settings are valid using 
    meltano config
     : 
    4. meltano config tap-mongodb test

Next steps

If you run into any issues, learn how to get help.

Capabilities

The current capabilities for tap-mongodb may have been automatically set when originally added to the Hub. Please review the capabilities when using this extractor. If you find they are out of date, please consider updating them by making a pull request to the YAML file that defines the capabilities for this extractor.

This plugin has the following capabilities:

  • about
  • catalog
  • discover
  • schema-flattening
  • state
  • stream-maps

You can override these capabilities or specify additional ones in your meltano.yml by adding the capabilities key.

Settings

The tap-mongodb settings that are known to Meltano are documented below. To quickly find the setting you're looking for, click on any setting name from the list:

You can also list these settings using 

meltano config
with the list subcommand: 

meltano config tap-mongodb list

You can override these settings or specify additional ones in your meltano.yml by adding the settings key.

Please consider adding any settings you have defined locally to this definition on MeltanoHub by making a pull request to the YAML file that defines the settings for this plugin.

Airbyte Config Auth Source (airbyte_config.auth_source)

  • Environment variable: TAP_MONGODB_AIRBYTE_CONFIG_AUTH_SOURCE

Authentication source where user information is stored. See the Mongo docs for more info.


Configure this setting directly using the following Meltano command:

meltano config tap-mongodb set airbyte_config auth_source [value]

Airbyte Config Database (airbyte_config.database)

  • Environment variable: TAP_MONGODB_AIRBYTE_CONFIG_DATABASE

Database to be replicated.


Configure this setting directly using the following Meltano command:

meltano config tap-mongodb set airbyte_config database [value]

Airbyte Config Host (airbyte_config.host)

  • Environment variable: TAP_MONGODB_AIRBYTE_CONFIG_HOST

Host of a Mongo database to be replicated.


Configure this setting directly using the following Meltano command:

meltano config tap-mongodb set airbyte_config host [value]

Airbyte Config Password (airbyte_config.password)

  • Environment variable: TAP_MONGODB_AIRBYTE_CONFIG_PASSWORD

Password


Configure this setting directly using the following Meltano command:

meltano config tap-mongodb set airbyte_config password [value]

Airbyte Config Port (airbyte_config.port)

  • Environment variable: TAP_MONGODB_AIRBYTE_CONFIG_PORT

Port of a Mongo database to be replicated.


Configure this setting directly using the following Meltano command:

meltano config tap-mongodb set airbyte_config port [value]

Airbyte Config Replica Set (airbyte_config.replica_set)

  • Environment variable: TAP_MONGODB_AIRBYTE_CONFIG_REPLICA_SET

The name of the set to filter servers by, when connecting to a replica set (Under this condition, the 'TLS connection' value automatically becomes 'true'). See the Mongo docs for more info.


Configure this setting directly using the following Meltano command:

meltano config tap-mongodb set airbyte_config replica_set [value]

Airbyte Config Ssl (airbyte_config.ssl)

  • Environment variable: TAP_MONGODB_AIRBYTE_CONFIG_SSL

If this switch is enabled, TLS connections will be used to connect to MongoDB.


Configure this setting directly using the following Meltano command:

meltano config tap-mongodb set airbyte_config ssl [value]

Airbyte Config User (airbyte_config.user)

  • Environment variable: TAP_MONGODB_AIRBYTE_CONFIG_USER

User


Configure this setting directly using the following Meltano command:

meltano config tap-mongodb set airbyte_config user [value]

Airbyte Spec Image (airbyte_spec.image)

  • Environment variable: TAP_MONGODB_AIRBYTE_SPEC_IMAGE
  • Default Value: airbyte/source-mongodb

Airbyte image to run


Configure this setting directly using the following Meltano command:

meltano config tap-mongodb set airbyte_spec image [value]

Airbyte Spec Tag (airbyte_spec.tag)

  • Environment variable: TAP_MONGODB_AIRBYTE_SPEC_TAG
  • Default Value: latest

Airbyte image tag


Configure this setting directly using the following Meltano command:

meltano config tap-mongodb set airbyte_spec tag [value]

Docker Mounts (docker_mounts)

  • Environment variable: TAP_MONGODB_DOCKER_MOUNTS

Docker mounts to make available to the Airbyte container. Expects a list of maps containing source, target, and type as is documented in the docker --mount documentation


Configure this setting directly using the following Meltano command:

meltano config tap-mongodb set docker_mounts [value]
Expand To Show SDK Settings

Flattening Enabled (flattening_enabled)

  • Environment variable: TAP_MONGODB_FLATTENING_ENABLED

'True' to enable schema flattening and automatically expand nested properties.


Configure this setting directly using the following Meltano command:

meltano config tap-mongodb set flattening_enabled [value]

Flattening Max Depth (flattening_max_depth)

  • Environment variable: TAP_MONGODB_FLATTENING_MAX_DEPTH

The max depth to flatten schemas.


Configure this setting directly using the following Meltano command:

meltano config tap-mongodb set flattening_max_depth [value]

Stream Map Config (stream_map_config)

  • Environment variable: TAP_MONGODB_STREAM_MAP_CONFIG

User-defined config values to be used within map expressions.


Configure this setting directly using the following Meltano command:

meltano config tap-mongodb set stream_map_config [value]

Stream Maps (stream_maps)

  • Environment variable: TAP_MONGODB_STREAM_MAPS

Config object for stream maps capability. For more information check out Stream Maps.


Configure this setting directly using the following Meltano command:

meltano config tap-mongodb set stream_maps [value]

Something missing?

This page is generated from a YAML file that you can contribute changes to.

Edit it on GitHub!

Looking for help?

If you're having trouble getting the tap-mongodb extractor to work, read the Airbyte connector FAQ, look for an existing issue in the Airbyte repository, file a new issue, or join the Meltano Slack community and ask for help in the 
#plugins-general
channel.

Install

meltano add extractor tap-mongodb --variant airbyte

Maintenance Status

  • Maintenance Status
  • Built with the Meltano SDK
  • Based on an Airbyte Connector

Repo

https://github.com/airbytehq/airbyte/tree/master/airbyte-integrations/connectors/source-mongodb-v2
  • Last Commit Date
  • License

Maintainer

  • Airbyte

Meltano Stats

  • Total Executions (Last 3 Months)
  • Projects (Last 3 Months)

Keywords

  • airbyte_protocolmeltano_sdk